EMAIL:
SALES
GREG
MIKE
DAVID
BRYAN


PHONE:
972-323-0797

FAX:
972-323-0785

   
Index>Home>Belt Conveyors >796 Incline Roller Bed


796 Roller Bed Inclined Floor-To-Floor Belt Conveyor
   

 

Download catalog page in pdf format

SPECIFICATIONS

BELTING: Black PVC rough-top.

CARRIER ROLLERS: 1.9" dia. x 16 ga. steel rollers, model 196S.

DRIVE PULLEY: 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged.

TAIL PULLEY: 4" dia., crowned, with 1-3/16" dia. shaft.

CENTER DRIVE: Reversible drive with 24" blet take-up.

BED: 7" x 12 ga. channel frame.

BELT SPEED: 60 FPM, constant.


NOSE-OVER: Provides smooth transition from incline to horizonal position.  Single nose-over adjust 0-20 degrees; double nose-over adjust 0-35 degrees.

BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.

RETURN ROLLERS: 1.9" dia. x 16 ga. steel, model 196S, adjustable.

ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.

FLOOR SUPPORTS: Optional

MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

ELECTRICAL CONTROLS: Optional

 24 Hour Shipments 
WARNING
Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors!